If you’re a homeowner, then you know that there are always new things to learn about your home. For example, did you know that in 2022 all boilers will have to meet a new efficiency standard? If not, don’t worry – we’ve got seven quick tips to help get you up to speed! Keep reading for more information.
Regularly Turn The Heating On
During the summer, one of the greatest boiler maintenance recommendations is to make sure your device is turned on at least once a month. This will keep the boiler functioning well, and you’ll be able to address any problems before the winter arrives. You can also clean any grit that has accumulated in the boiler when it is not in use by turning it on.
Turn on the central heating and leave it on for 10-15 minutes during the summer. During the spring and summer, do this frequently. This is a simple approach to ensure that all of the machine’s components are moving properly.
Every Year, The Boiler Should Be Inspected And Serviced
You should have an expert inspect your boiler once every 12 months to keep it in top shape, avoid costly breakdowns, and extend its lifespan. You may also keep your heating expenditures low by monitoring and servicing the boiler on a regular basis, as long as the manufacturer’s guarantee is still valid.
You will not be able to use the manufacturer’s warranty unless the boiler is serviced every year. These are crucial services that should only be performed by a gas safe engineer. These are professionals who will inspect the boiler to verify that all of its components function properly.
Bleed Your Radiators
You may find that your radiators are warm at the bottom and quite cold at the top in some cases. This is a sure sign that there is some trapped air inside, which should be eliminated to improve efficiency. Following a few simple actions will complete the process.
Use a plastic cover to preserve your carpet and avoid staining it. Turn the bleed valve counterclockwise using the key. While doing so, place an old cloth beneath it to catch any droplets. The air going out of the radiator at high pressure will make a hissing noise. When all of the air has moved out, the hissing will stop. Turn the key clockwise to close the valve.
Check For Warning Signs
Clunking noises, leaks, and sooty stains are all signs of an issue that has to be addressed. As a result, you should inspect your boiler on a regular basis for any of these indicators and take action before the damage becomes severe.
The sooner you identify and correct a problem, the better. Some customers wait too long to look for these warning signs, and as a result, they wind up paying a lot of money to get the problems resolved. It’s also critical to make sure that flues, external vents, and airbricks are clean and unblocked.
Balance The Radiators
The radiators must be balanced at all times for your boiler to function properly. It’s time to balance your radiators if the ones closest to your heater are warmer than the ones further away. This is something you can do on your own or with the help of a professional.
The majority of homeowners are unable to balance their radiators because, unlike bleeding them, this task is quite difficult. We recommend calling a gas-safe engineer unless you have previous experience.
The process will entail adjusting the radiators to ensure that warm water is distributed evenly throughout your home. Although complicated, it will not take long to finish, and your boiler will be operational once more.
Check The Boiler’s Pressure
The pressure of your boiler should be monitored on a regular basis. Most boilers have a gauge that measures the amount of water pressure in the system. The needle should be pointing to one bar, which is the standard operating pressure for most boilers.
If it falls below this level, you will need to add more water to the system using the filling loop. If the pressure is too high, on the other hand, you will need to release some of the water through the pressure-relief valve.
You can do this by gently turning the knob until water starts coming out. Do not turn it too hard or else the valve will become damaged. Once the water has been released, close the valve tightly.
You Must Not Attempt to Repair The Boiler Yourself
You may be tempted to take matters into your own hands and repair the boiler on your own. We strongly advise against this for a number of reasons.
First and foremost, boilers are complicated machines that require specialized tools and knowledge to fix. If you attempt to repair it on your own, you could end up making the problem worse. Second, boilers must be repaired by gas-safe engineers because they deal with flammable gas.
As a result, if something goes wrong, you could be putting yourself and your family in danger. Finally, attempting to repair the boiler on your own voids the manufacturer’s warranty.
So, these are seven quick tips to keep in mind when it comes to your boiler. Remember, safety is key – so if you have any concerns or doubts, please don’t hesitate to call Superior Mechanical Services. They want to make sure that your home stays warm and comfortable all winter long!
Do You Need A Boiler Installation Company You Can Trust?
Superior Mechanical Services, Inc. began in 1948 as a family-owned business with a vision to provide value-minded service with a down-to-earth approach to customers throughout the San Francisco Bay Area. As the premier Commercial and Residential Boiler Service provider for Livermore, Dublin, and Pleasanton, Superior Mechanical can do it all, from heating and air conditioning services to boiler services, to plumbing services. Our technicians are certified professionals who will ensure every part of your project is done right using a careful checklist to guide and test each step. At the end of your appointment, we’ll show you how to get the most out of your new system and give you tips on maintenance so it lasts for years to come. Contact us today for amazing service tomorrow!